My lights flicker/cycle when using dimmer. How do I set min/max levels in the dimmer?

Levven dimming controllers can work with dimmable LEDs, though dimmable LED lights can flicker or shut off if dimmed or brightened beyond their dimming range.  

First check to see if your lights are dimmable. If they are dimmable and your lights still flicker, make sure to set the min/max dimmable settings on the controller.

Use the Levven App to Set a Minimum and Maximum Dimming Level

Use the Levven app to set a minimum and maximum dimming level to prevent the LED from flickering.

Review the Set a Minimum and Maximum Dimming Level video (1:55).

Levven App Set Dimmer Min Max

Manually Set a Min / Max Dimming Level

Set the dimmer’s max brightness level:

  1. Press and hold the up/on the button on the switch to increase the light’s brightness.
  2. If the light flickers, release the up/on the button. Press and hold down/off on the switch to dim the light down to the point where no flickering occurs.
  3. 2-click/double-click the button on the GDT15 controller. This sets the highest brightness.
  4. The GDT15 controller’s LED indicator will flash green to confirm the setting is saved.
     

Set the dimmer’s min brightness level:

  1. Press and hold the down/off button on the switch to decrease the light’s brightness.
  2. If the light flickers, release the down/off button. Press and hold up/on the switch to brighten the light up to the point where no flickering occurs.
  3. 2-click/double-click the button on the controller. This sets the lowest brightness.
  4. The GDT15 controller’s LED indicator will flash green to confirm the setting is saved.
     

Reset the dimmer’s max/min brightness level to factory default:

  1. 3-click/triple-click the button on the GDT15 controller.
  2. NOTE: This will not clear any pairings or groupings in the controller’s memory. It only resets the brightness max/min settings to factory defaults.